Rated 4 out of 5 by Tithulta Not as hard as some
Wasn't hard at all to put together. If your not mechanically inclined then Google p90x chin-up bar assembly and watch the video I came across. Didn't need it, but still watched to make sure I had my ducks in a row.
Tho the bar is a little wide for some doorways, it wasn't an issue at my house. Used it for 2 weeks now an so far it hasn't whimpered a bit. My whole family has used it even though I'm the only one starting p90x. Dad 210lbs, and Bro-in-law 250lb are the heaviest to use it. I'm at 190 lb and counting.
January 14, 2011
Rated 1 out of 5 by UPSET DAD Hunk of junk, waste of money.
I knew it would not work in the drywall above the door, so I built a wood frame from the ceiling in the basement. The brackets bent so I drilled holes in the back bar and bolted it to the frame I made, then the bars were bending, so I boughy a chain and hooked to the front bar and mounted it to the celing, maybe it will hold our 100 pound daughter.
January 10, 2011
Rated 2 out of 5 by Jon F. instructions
Hello my name is jon,
I am starting to P90X system and when i recieved the chin up bar there was more little screws then the bigs ones. This was no big deal, because i called customer service and they sent me replacement parts. But this is a big kicker when i go the replacement parts they were an inferior kind. Which to me spending the time and money for this chin-up bar was replusive. Now, i found a way to put it all together with all the same screws. I dont know if everyone else is experiencing this problem, when I am ready to mount the chin-up bar is states to put the bars 13.75 in apart. Well aparently when i measured inside and outside the J-mounts they still didnt equal that measurement. The instructions and the gear needs to be sysmetrical in everyway. Your pulling up from a door frame and i dont know if it makes a difference those couple of inches but i would like to have it become specific. Im not happy with the inaccuracy of the instructions but i have installed it and seems to be fine. Just stating my opinion about the fact thanks .
January 9, 2011
Rated 1 out of 5 by Chinook product useless since it does not fit door frame
Since it does not fit the door frame of a normal house it is useless. Manufacturer should take them all back and do a simple redesign. What a waist of money.
January 7, 2011
Rated 1 out of 5 by Springerboy It damages my walls above the door trim.
I purchased the chin up bar with my P90X dvd program. It assembled relatively easy, but the upper bar where it wedges against the wall above the door trim does not have thick enough padding on it and the supplied screw heads damaged my sheetrock by putting holes in the wall above my door trim. Had to putty, repair and repaint my walls!
Product seems sturdy and made well, but will damage your walls.
January 2, 2011
Rated 1 out of 5 by frustrated doesn't fit door
My wife got it for me for fathers day, but it doesn't fit my door and they don't sell an extender piece like other makers do.
December 31, 2010
Rated 1 out of 5 by Duke of DM Owner
This product is very limited. You must have a clear wall space of 42". Doorways adjacent corners are not an option. It works only with 2x4 stud walls with requisite drywall and the chintziest of casing (door trim). Anyone who lives in an older home or a higher end new home with decent trim will find this bar useless. Get out the tools to put this baby together...........the fasteners and nuts are stubborn and there are no lock washers. Large rubber stand-offs on the business side of the unit where it necessarily interfaces with the casing of the doorway would be useful to displace the pressure over a larger area. This would eliminate/reduce the inevitable wear and tear. You could sell more of these if somebody thought it through more carefully. Mine is being returned.
December 28, 2010
Rated 1 out of 5 by Chisel My door frame is too think
My door frames are too thick to use this bar on, does P90X make longer (extended) "L" bars to accommodate this problem? The website does not specify the thickness of the doorway as a concern before you buy. Any solutions?
December 25, 2010
Rated 4 out of 5 by JockDoc Best bar for the money
I LOVE this bar. It has multiple hand positions, cushioned grips that don't spin or slide, and the bar doesn't flex or bend under weight. It mounts easily in any standard door frame without screws, hardware or any modification to the door frame, and it unhooks just as easily-- I set it up for my workout then take it down.
There are only 2 downsides that keep it from earning tops in the review categories . . .
First, on the horizontal bar that sits against the wall on top of the door frame moulding there are the 2 screw heads that protrude. These will permanently indent your drywall. I solved this problem by taping 2 paint stir sticks to the face of the bar, keeping the screws from touching the wall.
Second, the rubber handles that press against the vertical door case mouldings can dent the moulding. I prevent this by by placing a folded-up piece of thick cardboard box between the moulding and the bar handles.
December 21, 2010
Rated 4 out of 5 by thinkster Inaccurate Installation Specifications
I can't wait to start using this, but unfortunately have to re-do the installation. The instructions specify a 13.75" spacing of the brackets. This would place them at the outside of the vertical bars and the rubber does not permit clearance. The picture and the video clearly show the brackets go in the INTERIOR of the bars, therefore the correct spacing should be specified as 9.5" (i.e. 12.5" bar spacing - (2 x 1.5" bracket width)). Very frustrating to now have to patch holes because of poor documentation, please get the instructions straight.
December 9, 2010